B.E.G. Brück Electronic GmbH

KNX occupancy detectors

PD2-DIM-KNX/EIB

PD4-DIM-KNX/EIB

PD4-DIM-KNX/EIB-C

PD4-DIM-KNX/EIB-GH

PD9-DIM-KNX/EIB

PD9-DIM-KNX/EIB-GH

Indoor 180-KNX/EIN

Products >> KNX occupancy detectors >> PD-KNX/EIB >>LUXOMAT^® PD9-DIM-KNX/EIB-FC

LUXOMAT^® PD9-DIM-KNX/EIB-FC

Occupancy detector LUXOMAT^® PD4- DIM-KNX/EIB for building services engineering, which based on KNX/EIB-BUSnetwork (European Installation Bus).
Typical applications:
monitoring of large areas like underground garages, gyms, warehouses, loading ramps, halls

Dimming version:

With integrated bus coupler! Connection via WAGO standard bus connector
When using the BEG_DIM_HKL_V4.0 application program, four different operating modes are available:

(switching)

constant light control dimming)

NEW:

Specification of three target values: Two target values are regulated (specified in Lux) and one target value is a fixed setpoint (specified in %)
Target values can be changed using a communication object.
Soft start to slowly switch on the lighting to the target value
NEW: Reflection factor for improved adjustment to the ambient conditions
NEW: HVAC channels (switch channels) can now be switched using a pushbutton

PD9-DIM-KNX/EIB-FC / white

Technical data

Parameterization via ETS 2/3 and 4.
The product database for importing into the ETS must be downloaded from the B.E.G.-homepage.
Please note new version 4.0!
Supply voltage: 24 VDC from KNX/EIB-BUS network
Detection area: circular 360°
Range (Ø)in m:
- seated 4.00 m
- walking across 10.00 m
- walking towards 6.00 m
Protection degree: IP20 / Class II / CE
Dimension:
Detector Ø 45 x H 28 mm
Power supply L 120 x W 22 x H 29 mm
Ambient temperature: -25°C to +50°C
Housing UV- and shockresitant Polycarbonate
For integration in KNX/EIB-BUS systems

Downloads PD9-DIM-KNX/EIB-FC

Create tender nomination [...]

Downloads

Heating cost savings calculator

Product selector

Energy savings calculator

B.E.G. Solar system:
19:45: 2351.25 W
Total: 60306.22 kWh