B.E.G. Brück Electronic GmbH

Motion detectors KNX

RC-plus next KNX

RC-plus next 230 KNX

Products >> Motion detectors KNX >> RC-plus next KNX >>LUXOMAT^® RC-plus next 230 KNX

LUXOMAT^® RC-plus next 230 KNX

Motion detector for building services engeneering which based on KNX-BUS-network (European Installation Bus)
Application examples:
monitoring a whole side of a builing, warehouses, ramps or garages

Dimming version:

With integrated bus coupler| Connection via WAGO standard bus connector.
When using the BEG_DIM_HKL_V4.0 application programm, four different operating modes are available:
- Standard mode (semi-automatic or fully-automatic mode (switching)
- Semi-automatic or fully-automatic mode with constant light control (dimming)
- Slave mode
- New: Permanent dimmer (light control that is not dependent on presence)
Specification of three set values: Two target values are regulated(specified in lux) and one taerget value is a fixed a setpoint (specified as %)
Target values can be changed using a communication object
Soft start to slowly switch on the lighting to the target value

RC-plus next 230 KNX / white	97052
RC-plus next 230 KNX / black	97053

Accessories

Corner socket RC-plus next / white	97004
Wire basket BSK / white	92467

Technical data

Parameterization via ETS 2/3 and 4.
The product database for importing into the ETS must be downloaded from the B.E.G.-homepage.
Please note new version 4.0!
Power supply:
24 VDC from KNX-BUS network
Detection area: circled, 280°
Remote control: IR-RC, IR-RC Mini
Range: max. 20 m when walking across (tangential)
Degree of protection: IP54 / Class II / CE
Dimensions: L 121 x B 71 x H 85 mm
Material: Housing UV- and shockresistant Polycarbonate
Ambient temperature: -25°C to +55°C
Control output: For integration in KNX-BUS systems

Downloads RC-plus next 230 KNX

Create tender nomination [...]

Downloads

Heating cost savings calculator

Product selector

Energy savings calculator

B.E.G. Solar system:
19:45: 1779.63 W
Total: 59696.41 kWh