PD 9

     Products
>> >> PD 9 >>LUXOMAT® PD9-S-FC
image
LUXOMAT® PD9-S-FC
    Mini-occupancy detector LUXOMAT® PD9-S-FC, slave with circular detection area, ceiling mounted or directly built in lamps
  • Designed only for operation in combination with a master LUXOMAT® PD9-M-FP.
  • The investment costs can be reduced considerably.
  • Connection of sensor part and power supply by telephone plug RJ11 and 50 cm cable.
  • One master occupancy detector is necessary for controlling light and heating or other loads, whereas the slightest movements are detected by the slaves in any part of the room.
  • No limitation of the number of the slaves.
  • When a movement is detected, the slave transmitts an impulse to the master for further processing. However when the bus is occupied the slave occupancy detector thinks another slave sends already a signal or even the master by himself. In this case the impulse is not sent.
  • The movement is detected independently of light level. There are no more adjustment elements available.
  • The slave occupancy detector operates with a factory preset value of amplification.


   Type Part no.   
   PD9-S-FC / white 92905   
   PD9-S-FC / silver 92906   
   Technical data
  • Installation in parallel mode Master/Slave.
  • Cable length of power supply: 20cm, with colour coded stranded wires for terminal connection.
  • Detection area: circular 360°
  • Range (Ø) H=2,5m/T=18°C in m:
    seated 5
    walking across 10
    walking towards 6
    Attention: The volumetric sensitivity of the mini occupancy PD9 sensor is smaller than those of the PD1-PD5 series due to fewer lens segments.
  • Power voltage: 230V~ + 6%/-10%
  • Power consumption: < 1W
  • Ambient temperature: -25°C / +50°C
  • Protection degree/class: IP20 / II / CE
   Downloads LUXOMAT® PD9-S-FC
create tender nomination [...]
   Downloads




Copyright: ® 2010-09-10 - B.E.G. UK (Imprint)