PD 5
     Products >> >> PD 5 >>LUXOMAT® PD5-S-Clip
image
LUXOMAT® PD5-S-Clip
    Occupancy detector LUXOMAT® PD5-S-Clip, Slave with circular detection area, for clipping on fluorescent tubes, prewired
  • Designed only for operation in combination with a master LUXOMAT® PD5-S.
  • The investment costs can be reduced considerably especially for monitoring of big areas.
  • One master occupancy detector is necessary for controlling light and heating or other loads, whereas the slightest movements are detected by the slaves in any part of the room.
  • No limitation of the number of the slaves.
  • When a movement is detected, the slave transmits an impulse to the master for further processing. However when the bus is occupied the slave occupancy detector thinks another slave sends already a signal or even the master by himself. In this case the impulse is not sent.
  • The movement is detected independently of light level. There are no more adjustment elements available.
  • The slave occupancy detector operates with a factory preset value of amplification.


   Type Part no.   
   PD5-S-Clip / white 92316   
   PD5-M-1C-Clip / white 92315   
   PD5-M-DIM-Clip / white 92310   
   Technical data
  • Control and power unit in one housing
  • Detection area: circular 360°
  • Range (Ø) H=2,5m/T=18°C in m:
    seated 5
    walking across 10
    walking towards 6
  • Power voltage: 230V~ + 6%/-10%
  • Power consumption: < 1W
  • Ambient temperature: -5°C / +50°C
  • Protection degree: IP20
  • Class: II / CE
   Downloads LUXOMAT® PD5-S-Clip
create tender nomination [...]
   Downloads
Complete catalogue (31107kb)
Manual (1171kb)
Wiring diagrams (649kb)
Data sheet (328kb)
Tender nomination - doc (293kb)
Application examples (4068kb)
Emergency lighting-L1 (0kb)




Copyright: ® 2010-09-10 - B.E.G. UK (Imprint)